After getting false info that Raymond planned to do the concrete work today, I spend the morning putting the 2x6's together into 20' and 24' lengths, then tie everything together. It doesn't help that the lumber is not perfectly straight, cause this will influence my final laser shots, since the intent is to align the tops of all the lumber at the same level.
After joining everything together, I see where the high/low spots of the gravel are, so mark those areas, and also discover that the south-east corner is a few inches too low. So, I go to the north side to shovel some excess gravel into the wheelbarrow and add to the low area. Would be nice if I had the final small truckload of gravel!
No comments:
Post a Comment